您好,欢迎来到本网站!广州思德隆电子有限公司 专业生产:电磁铁厂家,电磁阀厂家直流电磁铁等产品
24小时业务咨询:18024667180
联系我们

联系人:张先生

电话:020-34903873

传真:020-34904811

手机:18024667180

网址:www.gdsdl.cn

邮箱:sdldz8@163.com

地址:广州南沙东涌镇昌利工业城三街4号

您现在的位置:首页 > 行业动态 > 详细内容思德隆信息
电磁阀厂家浅析造成电磁阀故障的原因(二)
来源:www.gdsdl.cn   发布时间:2014-06-26

  电磁阀厂家浅析造成电磁阀故障的原因(二)

  Reason analysis of electromagnetic valve failure caused by electromagnetic valve manufacturers (a)

  (电磁阀厂家)5、阀座:

  (electromagnetic valve factory), the valve seat 5:

  磨损和受到腐蚀等故障

  Wear and corrosion failure

  故障原因:长期的工作造成的磨损和具有腐蚀性的介质的影响,另外如果电磁阀实际的工作环境超过电磁阀本身可以适应的工作范围,也会加速电磁阀零部件的磨损。

  Fault: impact wear and corrosive medium term work, and if the electromagnetic valve the actual working environment than the electromagnetic valve can adapt itself to the scope of work, will accelerate the wear of electromagnetic valve parts.

  (电磁阀厂家)6、垫片和O型圈

  (electromagnetic valve manufacturers) 6, and O type ring gasket

  裂纹和损坏以及老化故障

  Crack and damage and aging failure

  故障原因:超过电磁阀的适应的工作环境范围,长期使用的自然磨损和老化问题

  Fault: more than adapt to working environment range of electromagnetic valve, long-term use of natural wear and aging problem

  (电磁阀厂家)7、橡胶线圈:

  (electromagnetic valve manufacturers) 7, rubber coil:

  常见故障:磨损和泄漏

  Common faults: wear and leakage

  故障原因:正常的磨损是长期工作造成的,过快的磨损可能是超过了电磁阀的工作适应范围,泄漏则是橡胶线圈磨损后发生的故障问题。

  Fault: normal wear is caused by long-term work, excessive wear may be more than the solenoid valve working range, is the leakage fault rubber coil wear occurred after.

  (电磁阀厂家)8、弹簧:

  (electromagnetic valve factory), spring 8:

  常见故障:折断或者变形

  Common faults: break or deformation

  故障原因:电磁阀弹簧的使用寿命到期,或者是工作环境压力等超出电磁阀的适应的工作范围。

  Failure: due to electromagnetic valve spring life, or work environment pressure exceeds the solenoid valve to the scope of work.

  电磁阀产品发生故障问题,多是产品实际的工作环境超出了电磁阀本身的适应的工作环境造成的,例如工作压力过大,介质腐蚀性过强和温度粘度等问题。另外电磁阀产品零部件的使用寿命到期,长期的使用造成的电磁阀故障发生的情况也比较多。其他的就是例如安装问题,产品的零部件质量问题等。

  Electromagnetic valve product failures, more is the product of the actual working environment beyond the solenoid valve itself to adapt to the working environment is caused, for example, work pressure is too large, the problem is too strong and the corrosive medium viscosity temperature etc.. Due the other valve product and the service life of components, failure electromagnetic valve caused by long-term use is also more. The other is such as installation, product quality issues etc..

  电磁铁厂家,电磁阀厂家,直流电磁铁--广州思德隆电子有限公司(www.gdsdl.cn)

  Manufacturers electromagnet, electromagnetic valve manufacturers, DC electromagnet - Guangzhou Delong Electronics Co., Ltd. (www.gdsdl.cn)

相关产品

相关新闻